Movie About Groping In Japan

Manual voltage control of single cells - Part 3: voltmeter and associated Power

Hi,

finally comes. After my last year time was no longer possible to complete my project of an integrated manual monitor individual cells, I have now successfully completed the project today.
to technology, how can I switch between the individual cells, I have written in the first two parts have sufficient lot.
Now It was just a matter of the voltmeter to be connected correctly and installed a battery compartment for AA cells for the separate power supply to the instrument.
In the first picture you can see the voltmeter, which just displays the voltage of a cell.

The following pictures show the battery compartment, on which the voltmeter to the operating voltage of 9V is supplied. The subject I have shallow rear integrated directly into the removable bottom flap of the helmet compartment. That was pretty easy, since the subject was chosen to match its dimensions.
Also, I've built two mini-banana jacks so that the voltmeter can also be operated with a separate power supply (If there are no batteries to hand times).

Some are now wondering, perhaps, why I do not have the power to the voltmeter directly tapped as the light.




Well, that was originally ill-way of the plan.

Unfortunately in the experiment then found that my voltmeter is no difference between the mass or the negative terminal of the operating voltage and the ground or the negative terminal of the measuring voltage. This then led to the voltmeter, want to be added depending on which cell you, not stress got to maybe 4V, but up to 70V. This was my first voltmeter unfortunately destroyed :-(
I'm not a real electrician ;-)


But now everything works great and I feel with the structure, combined with my homemade switch is not only possible to measure each cell individually, but also on demand via sockets on the switch (I have I already described in detail below) load cells individually.
However, only with a maximum charge current of less than 500mA, as fuses are installed, go through the usual.

So that is all for now. As soon as I once made bissel measurements, I give around here.
greeting

How To Emulate A Usb Stick

eLogger V3 abandoned

Hi, I'm

in a forum already heard complaints that I have updated the blog is no more in, I would hereby re-enter the new season. Over the long winter, I rarely used the scooter, so there was nothing new.

first: It was not possible for me to get eLogger operable with the display up and running. Although the parameters are all moving within the official tolerance of eLogger, the eLogger is destroyed as soon as the display is connected. If it is operated without a display, everything works fine. Since this should not be, I have received after each test a new eLogger by the dealer under warranty. Unfortunately, it was probably not how anfgangs believed unique to a manufacturing error. The problem is reproducible. This is the logger unfortunately unusable for me :-( It is now being sold on ebay (fully functional, there appears to be guaranteed).
Alternatively, I'm going to soon be the Cycle Analyst (to be here in the vicinity under the name Bob Cycle) in detail View.
Also, I'm still a review regarding my manual maintenance unit (built-in digital voltmeter) guilty. I will be late filing soon.

That's it. Please be patient.

greeting